GLK4-1600 For 1600mm Metal Coil Strip Automatic Feeding Compacted Punch Machine

2, Limited arm: by hand wheel control.

3, Decoiler mandrel: hydraulic expansion.

4, Supporting arm: support the metal steel sheet coil, so as to protect the uncoiler mandrel.

5, Coil car: rubber cushion for non-slip when loading the metal coil.

6, Inlet feeding arm: clamp the metal strip and feeding it into straightener (leveler) smoothly.

7, Control display screen: operate the coil feeder machine with electrical control.

8, Straightener: straightener rollers are adjusted by worm and gear.

9, Outlet: outlet for strip feeding out.

We are manufacturer of metal stamping equipment like decoiler, straightener, feeder machine for metal coil handling solution in press room.

Our equipment is for automation feeding system in press room to realize automatic stamping.

The related machines of us are including 3 in 1 unit coil feeder, 2 in 1 uncoiler and straightener machine, single decoiler machine, horizontal uncoiler machine, straightener machine, servo coil feeder machine, mechanical press machine, etc. 

Our machines are adopted in automotive stamping manufacturer ( automobile manufacturer), construction metal parts manufacturer, furniture metal parts manufacturer, kitchen ware metal parts manufacturer, costume eyelet ( button) manufacturer, electronic parts stamping manufacturer, etc.

For metal punching / metal stamping / metal pressing cases, we could offer you best solution with whole production line including uncoiler, straightener, servo coil feeder, power press machine and progressive molds. The machines choosing will be according to your metal coil's specification and the technical requirement of your product. Our tooling engineer will design mold for you according to the CAD drawings or samples of your metal parts. After stamping tooling designed, we will know the tonnage and type of mechanical press machine you required and the sized of metal coils you need. 

Our machines has been exported to many countries and areas so that if you need to have a inspection of our metal stamping equipment, you may visit our clients' factory under their permission.

Also we will test and do 100% inspection of our machines before shipment.

Your visiting to our factory are warmly welcomed.